Find your guide

Independent port guide.

System Requirements · Savage Wind Recomp

Breath of the Wild PC Port System Requirements

Savage Wind can run on Windows 10+ or Linux with a processor supporting SSE4.2, a graphics driver supporting Vulkan 1.3 and about 35 GB free for setup. An i5-3470 + RTX 2060 report reached 58.9 FPS in shrines, about 44 outdoors and 25–35 in heavier areas. That setup's frame rate was mainly limited by the processor.

On this page

Which Systems Are Supported?

System Package support What to know
Windows x86-64 Released Use the Windows package.
Linux x86-64 / Steam Deck Released Use the AppImage, the Linux application file.
Linux aarch64 (ARM64) Highly experimental A setup fix is planned for Alpha 4.
macOS / Android / iOS No package in these releases Savage Wind's published packages target Windows and Linux; Android is outside their support.

Minimum Compatibility Requirements

Component Savage Wind requirement
System Windows 10+ x86-64; Linux x86-64 with glibc 2.35+, a system library.
Processor SSE4.2 processor instructions; AVX2, FMA and BMI2 instructions enable the faster build.
Graphics A GPU and driver supporting Vulkan 1.3, the graphics system the port uses.
Storage About 35 GB free for setup.

For a frame-rate target, compare the hardware and scene results below.

Player Performance Reports

Hardware System and resolution Result Report
i5-3470 · RTX 2060 6 GB Windows · 1440x900 58.9 FPS in shrines; about 44 outdoors; 25–35 in heavy areas 0.3.0-alpha.3
i7-4770 · RX 560 4 GB CachyOS Linux · 1366x768 35–50 FPS 0.3.0-alpha.3
Steam Deck SteamOS 3.8 About 40 FPS at a 60 cap; steady 30 at a 30 cap 0.3.0-alpha.3
i7-12700 · RX 9070XT 2560x1440 Over 100 FPS in one area 0.3.0-alpha.3
Xeon E5-2650v3 · RX 570 4 GB Windows 11 Around 29 FPS 0.3.1-alpha.3
Ryzen 5 5600GT · integrated Radeon Windows 11 About 10–20 FPS in gameplay; 60 FPS in the menu 0.3.1-alpha.3

Full test conditions

  • i5-3470 / RTX 2060: game 1.8.2; NVIDIA 617.42; 1440x900 output with a 1440x810 image; Compatible mode; VSync FIFO (vertical-sync mode); precompiled cache. The outdoor figures come from the maintainer's analysis; a 30 FPS cap was recommended for this processor.
  • i7-4770 / RX 560: 60 FPS cap; fullscreen; VSync Off; upscaler Off; driver unspecified.
  • Steam Deck: integrated AMD graphics (VANGOGH); model unspecified; Mesa 26.2; 30/60 FPS caps; Console shadows advised; power setting unspecified. The frame rates were measured at one standing point.
  • i7-12700 / RX 9070XT: measured after an Adrenalin shader-cache reset; other settings omitted.
  • Xeon E5-2650v3 / RX 570: 16 GB RAM; Adrenalin 26.5.2; remaining settings omitted. The tested scene used about 6.8 GB RAM, with spikes of 34–43 ms between frames.
  • Ryzen 5 5600GT: driver 31.0.21924.61; Vulkan 1.3.260; remaining settings omitted.

Additional graphics reports:

CPU or GPU: What Matters More?

On the i5-3470 setup above, the graphics card mostly waited for the processor outdoors. A processor without AVX2 uses the slower Compatible mode.

Laptops and Graphics Memory

Laptop hardware Result Report conditions
GTX 1050 Ti Startup failure Alpha 2 report; see the graphics compatibility section for the Pascal startup workaround.
RTX 3070 · Legion 5 Pro About 35 FPS Player comment; exact port version omitted.
MX 350 2 GB Out-of-graphics-memory (VRAM) error Player comment; port version, CPU and settings omitted.

For handheld settings, follow Steam Deck.

Graphics Card Compatibility and Drivers

Use a driver supporting Vulkan 1.3. Choose the row matching your system and graphics hardware.

System / graphics Known behavior in Alpha 3 What to do
Windows · NVIDIA Players worked around startup crashes on Pascal-generation cards; automatic handling is planned for Alpha 4. For this crash, use the presentation-thread startup workaround.
Windows · AMD A cache reset restored the original Alpha 3 on an RX 9070 XT; the hotfix is slower on some PCs. RX 570/RX 580 terrain faults remain in these builds. Use Download for the cache-reset and package choice.
Windows · Intel One Celeron report reached gameplay after the black-window investigation; it omits the successful change and exact version. For a matching startup failure, use Troubleshooting.
Linux · AMD with RADV, the graphics driver RX 560 has a pause-menu graphics fault; its feedback-loop workaround costs FPS. Use Console shadows on Deck and follow Troubleshooting for the matching failure.

How Much Storage Does Setup Use?

Item Space or support
Program download Windows hotfix ZIP: about 90 MB; Linux x86-64 AppImage: about 85 MB.
Game content About 15 GB for the RomFS game-content image, the packed content setup creates; original extracted files and prepared copies take additional space.
Shader cache The i5-3470 report loads 349.5 MB of prepared shaders; size varies with the version, device and played content. Cache report.

For update and DLC requirements, use Game Files.

Alternative route

Using Wii U Files Instead?

BotW-Native publishes a Windows x64 package.

Item Requirement or status
System Windows 10/11.
Graphics Vulkan 1.1 driver.
Local build Windows MSYS2 UCRT64 tools, the build environment used to prepare the game on your PC; about 0.5 GB RAM per compilation job.
Linux / macOS / iOS Linux development is in progress; the current package is Windows. Apple-related source code comes from a separate upstream project.

One hybrid-laptop report describes the program selecting integrated graphics despite the OS preference; its exact version and GPU models are omitted, and the issue remains open.