How to Install Breath of the Wild on PC
Follow this guide to install Savage Wind on Windows or Linux; building the game code takes about 6 minutes on a desktop with a 12-thread CPU, with extra time for copying and shaders.
On this page
Before You Start
The installer prepares the game for your computer using your files; you don't need to write code. The Windows package includes the tools and libraries needed for this build.
- Choose the package for your operating system and processor on Download.
- Prepare your updated game files with Game Files.
- Check Vulkan compatibility and writable storage on System Requirements.
- On Linux, you need glibc 2.35+ (a system library), Vulkan graphics support and a compatible graphics driver. Run the AppImage, the Linux application file, with FUSE3 support or the extract-and-run option.
Install on Windows
1 Choose the Windows package
Open Download and choose the package for your graphics hardware.
| Graphics | Package | What to do |
|---|---|---|
| Intel | 0.3.1-alpha.3 hotfix | Use the hotfix. |
| AMD | 0.3.0-alpha.3 | Reset the driver shader cache and try this original Alpha 3 build; use the 0.3.1-alpha.3 hotfix if the launcher stays black. |
| NVIDIA | 0.3.0-alpha.3 or 0.3.1-alpha.3 | Either package works. |
2 Extract it to a writable folder
Extract the Savage Wind zip outside Program Files, somewhere the program can write files. Leave room beside the program for prepared game files, saves and settings.
3 Prepare the game folder
Use Game Files to prepare your own Switch game files updated to 1.9.0. Put exefs/, the folder containing the game's executable files, and romfs/, the complete updated game content, inside one parent folder. Apply the matching update to the base content before selecting that parent in setup.
game/exefs/mainmain.npdmrtldsdksubsdk0
romfs/System/Version.txt[complete updated content]
4 Start setup
Run savagewind.exe, the Savage Wind program, and select the parent folder containing both exefs/ and romfs/. Choose Set up game files.
5 Wait for setup to finish
Setup checks the game version, copies the files, packs the game content and builds the game for your computer. It then prepares shaders before play. Full shader preparation is optional and enabled by default; let it finish before starting the first scene.
On a desktop with a 12-thread CPU, the code-build stage takes about 6 minutes; copying and shader preparation take extra time. Setup moves through these stages and starts the game when it finishes. If a stage stops progressing, see If Installation Gets Stuck.
Install on Linux
Download the Linux x86-64 AppImage on Download and prepare your own Switch 1.9.0 folder using Game Files. For handheld-specific test results and settings, see Steam Deck.
1 Choose your package
Warning
Use the x86-64 AppImage for an Intel/AMD Linux PC or Steam Deck. The ARM64 package is highly experimental.
2 Make it executable
Open a terminal in the folder containing the AppImage and run:
chmod +x Savage_Wind-0.3.0-alpha.3-x86_64.AppImage
3 Run the AppImage
Launch the downloaded file with this command; the first start opens game-file setup.
./Savage_Wind-0.3.0-alpha.3-x86_64.AppImage
Warning
For a FUSE startup error, install your distribution’s fuse3 package, which supplies fusermount3. For the extract-and-run alternative, follow the Savage Wind Linux guide; its example abbreviates the filename.
4 Select your prepared game folder
Select the parent folder containing exefs/, the executable files, and romfs/, the complete updated game content. Choose Set up game files.
game/exefs/romfs/System/Version.txt
5 Wait for setup to finish
Setup checks the files, copies them, packs the game content and builds the game for your computer. Let shader preparation finish before entering the game; full shader preparation is optional and enabled by default. The game starts after setup finishes.
In the maintainer’s Steam Deck test, building the code took about 16 minutes and shaders took 7 minutes. See the Savage Wind Linux guide for that test. If a stage stops progressing, see If Installation Gets Stuck.
Using Wii U Files Instead?
BotW-Native v0.1.1 uses Wii U files and builds the game locally on Windows.
- Keep the complete release zip together so the source and supporting files remain available to the local build.
- Prepare the Wii U USA base game’s
code/,content/andmeta/folders. Overlay the 1.5.0 update folders and select the merged parent folder; the target is USA v208. - Keep double quotes out of configured paths.
- Open
BotW-Native-Setup.exeorBotWLauncher.exeand follow the guided setup, selecting that merged Wii U folder. The local build uses MSYS2 UCRT64, CMake, Ninja, Python and the other required libraries listed by the project. - Select Play in the launcher to start the game.
After Installing
Starting the game
On Windows, run savagewind.exe to start the game. On Linux, open the AppImage to start it.
Configuration
On Windows, open Savage Wind Configuration.exe to reach Play, Settings, game-file setup, rebuild and deletion controls. On Linux, run the following command to reopen Configuration and change prepared game files or rebuild. Keep only the selected AppImage in the working folder when using the wildcard.
./Savage_Wind-*.AppImage --config
Configuration can run shader preparation again.
Where your data is stored
On Windows, game data normally sits beside the program. On Linux, game data, settings, saves and caches go to $XDG_DATA_HOME/savagewind, normally ~/.local/share/savagewind, separate from the AppImage. The SAVAGEWIND_DATA_ROOT environment variable can select another data folder. This location can use internal storage even when the AppImage sits elsewhere.
Your first time in the game
- Open Options on the title screen or pause → System → Options.
- Set a frame-rate limit your PC can sustain.
- Test your controls.
- Save and reload your progress.
Savage Wind does not support DLC yet; support is planned for a future release.
Menus changed between releases, so use the instructions for your installed version.
For startup stages, crashes and log locations, see Troubleshooting.
If Installation Gets Stuck
Check the stage and log when setup gets stuck. Find log locations in Troubleshooting.
- 1Select the parent containing both
exefs/andromfs/, rather than an archive or an update-only folder. - 2Check that enough space is free to copy the files and prepare the game data.
- 3Confirm the executable files and RomFS use the same update version.
- 4If the code build fails, keep the log and inspect the failing step.
Free Up Space After Installing
You can delete
- You can delete the original game folder you selected during setup if you don't plan to run setup again; the installer has copied it into
extracted/.
Keep
- Keep the prepared
extracted/data and generated game library: the game needs them to start. - Keep
save/and settings to preserve your progress and preferences.
Sources
Fact checks: October 29–31, 2026.
- Savage Wind 0.3.0-alpha.3 release notes github.com
- Savage Wind 0.3.1-alpha.3 hotfix release notes github.com
- BotW-Native v0.1.1 release notes github.com
- BotW-Native v0.1.1 README github.com
- Savage Wind 0.3.0-alpha.3 README github.com
Zelda PC Guide