Find your guide

Independent port guide.

Controls · TotK Recomp

Tears of the Kingdom PC Controls

Yes, the PC game that TotK Recomp builds from your Switch files supports keyboard, mouse and the first connected compatible gamepad. Automatic button layout selects Nintendo positions for Nintendo-labelled pads and Xbox mapping for other pads; choose the layout before learning the bindings.

On this page

Controller or Keyboard and Mouse?

Controller Support What to know
Compatible gamepad Buttons First detected pad is used.
Gamepad with exposed sensors Motion and rumble Device must expose those functions.
Switch 2 Pro / Windows Bridge software Its virtual controller affects gyro, or tilt/rotation aiming.

Keyboard, mouse and controller inputs can be used together. In the settings menu, arrows move, Enter selects, Q/E change tabs and Esc goes back. Gameplay has separate keys for movement, camera, interaction and inventory.

Default Controls

With Button layout set to Automatic, Xbox and PlayStation pads follow the Xbox layout while Nintendo pads follow Nintendo positions. The table gives both defaults; changing Button layout or remapping changes which physical button performs the action.

Action Keyboard / mouse Controller
Move W A S D Left stick
Camera Mouse / arrows Right stick
Attack Left mouse Xbox Y / PS Triangle (top); Nintendo Y (left).
Shield / lock on Right mouse / Z Left trigger (Xbox LT / Nintendo ZL).
Bow F / X Right trigger (Xbox RT / Nintendo ZR).
Jump Space Xbox X / PS Square (left); Nintendo X (top).
Run / cancel Left Shift Xbox B / PS Circle (right); Nintendo B (bottom).
Interact E Xbox A / PS Cross (bottom); Nintendo A (right).
Abilities Q Left shoulder (Xbox LB / Nintendo L).
Throw R Right shoulder (Xbox RB / Nintendo R).
Crouch Left Ctrl Left-stick click
Scope C Right-stick click
Quick select 1 2 3 4 D-pad
Inventory Tab Menu / Start (Nintendo Plus).
Map M View / Back (Nintendo Minus).
Settings F1 or Esc View + Menu (Nintendo Minus + Plus).
Performance overlay F10 Click both sticks

F11 toggles fullscreen from the keyboard. To exit, open F1 and choose Quit game.

How to Remap Controls

  1. 1
    Open F1 → Controls and select the keyboard or controller cell for the action.
  2. 2
    Press Enter or A, then press the replacement input; Esc or five seconds cancels capture.
  3. 3
    Use Delete, Backspace or X to clear a binding, or Reset all buttons to restore the selected layout.

Adjust Mouse Sensitivity and Stick Drift

Raise Mouse sensitivity in F1 → Controls if turning feels too slow; the mouse still follows the game’s stick response and turn-speed limit. For stick drift, open Analog sticks, let go of the stick and set its dead zone, the small centre movement that is ignored, just above the displayed resting value.

Button layout changes what the face buttons do. Button prompts chooses Nintendo or Xbox artwork after a restart, so set the mapping and on-screen pictures separately.

Control Range / default Where
Mouse sensitivity 0–10 / 1 Controls / mouse_sens
Each stick's dead zone 0–50% / fallback 8% Controls / left or right
Right-stick camera speed 0.1–3 / 1 Controls / stick_sens
Rumble strength 0–300% / 130% Controls / rumble_strength

Rumble starts On, with strength and curve controls. Esc releases the pointer; click inside the window to capture it again.

Motion Controls

Supported gamepads can provide gyro and accelerometer input when the device exposes its sensors. For Switch 2 Pro on Windows, use the documented bridge route: an emulated DualSense output can expose gyro, while other outputs can have different motion support.

The FOV control changes how much of the scene is visible; its range and game-version requirement are on Settings.

Controller Not Working?

  1. 1
    Check the log for gamepad detection and the active layout.
  2. 2
    Check the bindings for the action and the selected controller layout.
  3. 3
    With a Switch 2 Pro bridge, run one bridge at a time and check whether Steam Input, Steam’s controller remapping system, has claimed the device.
  4. 4
    For a continuing detection or motion problem, use the controller fault checks and keep the failing run's input log.
Alternative route

Using UltraTears or Weeping of the Empire Instead?

Use each project's own bindings: the keyboard layouts differ from TotK Recomp.

UltraTears Default Controls

For Deck tilt aiming, use the current build: it reads Deck gyro while buttons and sticks keep their Steam Input layout.

UltraTears supports keyboard and controller; mouse-camera support is planned. Face buttons follow Nintendo positions: interact is right, cancel bottom, X top and Y left.

Action Keyboard / mouse Controller
Move W A S D Left stick
Camera Arrow keys Right stick
A / interact J Right face button
B / cancel K / Space Bottom face button
X I Top face button
Y U Left face button
L / R Q / E Shoulders
ZL / ZR Alt / Shift Triggers
Plus Enter Plus
Minus / map Tab / Esc Minus
D-pad T F G H D-pad
Stick clicks Z / C L3 / R3

Use F11 or Alt+Enter for fullscreen.

Weeping of the Empire Default Controls

Weeping supports keyboard/mouse, XInput pads, DualSense, DualShock 4, Switch Pro and Joy-Con. Use F10 → Controls → Controller to switch from position-based buttons to matching printed labels.

Action Keyboard / mouse
Move W A S D
Camera Mouse / arrows
Jump Space
Interact E
Attack Left click
Shield Right click
Sprint Shift
Crouch Ctrl
Bow F
Inventory I
Map M
Settings F10

Supported controllers can also provide gyro input in Weeping. Use the controller mapping section for pad changes and Key bindings for keyboard actions. Settings also opens with L3+R3. Open F10 → Controls → Key bindings and use Add key for the action; controller mapping has its own section. Clicking inside captures the pointer; F10 or Alt+Tab releases it.

Weeping adds sprint/shield toggles, rear paddles, walk and camera speed, rumble controls and live stick-position readouts in F10 → Controls. For the current keyboard material-selection fault, press Enter on each material; G throwing a carried object and E picking up while climbing are still awaiting fixes.